I. Overview of the glass-ceramic heating plate: 
    The outer surface of the crystal glass plate is permanently integrated with the glass plate to form an inorganic conductive resistance film layer. The resistance film layer emits infrared heat after being electrified and heated, forming a heat radiation source and heating by conduction and convection.
     
Second, the performance characteristics of the glass-ceramic heating plate: 
        1. There is no open flame and no oxidation when the module is working, and its service life is 50 times longer than that of ordinary heating wires;
        2. The component uses glass-ceramic as the carrier, which has a small expansion coefficient and strong infrared radiation. 15um, good for human health;
        3. The module adopts the surface heating method, the whole area is heated, the power density is low, the film temperature is low, and the working time is high Film temperature≤230℃;
        4. The component has good thermal shock resistance, and the glass heating plate works at 1.15 times the rated input power to establish a stable state until. Pour 1 liter of water (water temperature 15℃±5℃) into a tube with a diameter of 5mm, and then pour it directly to the center of the front surface of the glass heating plate at a speed of about 10mL/S, and the glass plate will not be broken or burst.
        5. The surface of the component has a glazed glass effect, which is rich in color, full of personality, and will never fade.
        6. The same glass surface can be designed into high and low temperature areas according to requirements, and the temperature difference can reach more than 100 ℃ , the existing temperature difference will not have any effect on the glass properties.
     
Third, the application of glass-ceramic heating plate: 
        Glass Heater Insulation Platen Towel Drying Rack
     
Fourth, the technical indicators of the glass-ceramic heating plate: 
        1. Electric strength: 3750V/1min 0.5mA, no breakdown flashover;
        2. Service life: 200℃ temperature controlled dry burning ≥20000 hours;
        3. Power deviation: +5-10%
        4. Power density: the effective heating area of the film (its power density is related to the operating temperature of the whole machine structure)≤1.00 W/CM2;
        5. Power supply voltage: AC/DC;
        6. Component size: can be customized according to customer requirements.

Tempered glass heating plate overview: 
        The electric heating film tempered glass heating plate is made of inorganic ceramics, glass and other non-metallic conductive materials and infrared radiation materials. Printing, high temperature sintering and other processes are compounded on the outer surface of the tempered glass, and the glass plate is permanently integrated to form an inorganic conductive resistance film layer. type heating.
The performance of the glass heating plate: 
        1. There is no open flame and no oxidation when the components are working, and the service life of components such as ordinary heating wires is 20-100 times longer;
        2. The component uses high-quality glass as the carrier, with strong infrared radiation, and its infrared wavelength is 4-20um, which is beneficial to health;
        3. The element adopts the surface heating method, the whole area is heated, the power density is low, the film temperature is low, and the working time is high Film temperature≤230℃;
        4. The components have good thermal shock resistance, and the glass heating plate is impacted with cold water when it is working In the center of the front surface, the glass plate will not be broken or cracked;
        5. The surface of the component has a glazed glass effect, which is rich in color, full of personality, and will never fade.
    Application of glass heating plate: glass electric heater, electric table top, heat preservation table, clothes drying rack, towel drying rack, electric heating glass fish tank
        6,     
Fourth, the technical indicators of the glass heating plate: 
        1. Electric strength: 3750V/1min 0.5mA, no breakdown flashover;
        2. Service life: 140℃ temperature controlled dry burning ≥20000 hours;
        3. Power deviation: +5-10%;
        4. Power density: the effective heating area of the film (its power density is related to the overall structure and operating temperature) ≤ 0.3W/CM2
        5. Power supply voltage: AC/DC;
        6. The bending, impact resistance, fragmentation state, shot bag impact and other properties of the components are in line with the "GB/ T9963-1998 Tempered Glass Standard";
        7. Component size: can be customized according to customer requirements